KITCHENAID W10118037B - Manual (Page 9)

9
3. Adjust leveling legs based on the cabinet opening
measurement and the chart below.
4. Place dishwasher in upright position.
Route Electrical Wiring
Follow all national and local codes and ordinances for completing
electrical supply to cabinet.
Option 1: Right-hand side utility route
After routing the electrical wire through the right-hand hole,
attach the wire to back left-hand side of cabinet wall 8"
(20.32 cm) above the floor. Then continue routing the wire along
the left-hand side of cabinet opening to the front of the opening.
Option 2: Left-hand side utility route
After routing the electrical wire through the left-hand hole,
continue routing the wire along the left-hand side of cabinet to
the front of the opening.
H : X H : X
33
⁷⁄₈
" (86 cm) : 0" 34
¹⁄₂
" (87.6 cm) :
⁵⁄₈
" (1.6 cm)
34" (86.3 cm) :
¹⁄₈
" (0.3 cm) 34
⁵⁄₈
" (87.9 cm) :
³⁄₄
" (1.9 cm)
34
¹⁄₈
" (86.7 cm) :¼" (0.6 cm) 34
³⁄₄
" (88.3 cm) :
⁷⁄₈
" (2.2 cm)
34 ¹⁄₄ " (87 cm) : ³⁄₈ " (1 cm) 34 ⁷⁄₈ " (88.6 cm) :1" (2.5 cm)
34 ³⁄₈ " (87.3 cm) :½" (1.3 cm) 35" (88.9 cm) :1 ¹⁄₈ " (2.9 cm)
X
WARNING
Disconnect electrical power at the fuse box or circuit
breaker box before installing dishwasher.
Failure to do so can result in death or electrical shock.
Electrical Shock Hazard
Route wire through 1½" (3.81 cm) hole located 8" (20.32 cm) above
the floor.
Route wire through 1½" (3.81 cm) hole located 8" (20.32 cm) above
the floor.