Setting scan settings for scan to network folder – Kodak 5.1 User Manual
Page 34
Advertising
Online Printer Management Tool
28
www.kodak.com/go/aiosupport
Setting scan settings for scan to network folder
When you send a scan to a network folder, the printer uses defaults that you set up
under scan settings.
1. Select
Scan To Network Folder
>
Scan Settings
.
2. Select the scan settings that will be used for all scans sent to a network folder.
NOTE: You can enter a Filename Prefix of your choice.
3. Click
Save
.
You can now send a scan to a network folder from the printer control panel. See
Advertising
This manual is related to the following products: