Zooming and cropping pictures – Kodak 5.1 User Manual
Page 57
www.kodak.com/go/aiosupport
51
KODAK OFFICE HERO 5.1 All-in-One Printer
Zooming and cropping pictures
Use the zoom buttons to select a portion of your picture for printing.
To zoom and crop a picture:
1. Load photo paper with the logo side facing up (see
), and move the left paper-edge guide until it touches the paper.
2. Insert the memory card into the memory card slot or connect the digital camera
or portable drive to the front USB port.
IMPORTANT:
Use only one slot or port at a time.
3. Press
or
to select the picture you want to crop, then press
OK.
4. Press
Zoom + to enlarge the picture on the LCD. A red box shows the area that
will be printed.
NOTE: You can press
Zoom + repeatedly to enlarge the picture in increments of
0.25 up to a magnification of 5X. Press
Zoom – to decrease the
magnification in increments of 0.25 back down to 1X.
5. Use the navigation buttons to move the picture on the LCD up, down, left, or
right. Only the part of the picture in the red box will print. The crop window
matches the aspect ratio of the selected output print size.
6. After you have pressed the zoom button(s), press
Rotate if you want to rotate
the red box in 90 degree increments. This will determine the content that is
printed.
NOTE: Zooming and cropping does not change the saved picture on the memory
card.
7. When you are satisfied with the picture, press
OK. The picture appears in the
original view with a red box around the portion of the picture that will print.
8. Press
Start to begin printing.
left paper-edge guide