Kenwood KDC-HD545U - Manual (Page 36)

36 | KDC-BT645U/ KDC-HD545U
ANT. CONT
MUTE
P.CONT
STEERING WHEEL
REMOTE INPUT
REMOTE CONT
– +
L R
Connecting Wires to Terminals
FM/AM antenna input
Front output
Fuse (10A)
Wiring harness
(Accessory
1)
White/Black
Gray/Black
Green/Black
Purple/Black
White
Gray
Green
Purple
To front left speaker
To front right speaker
To rear right speaker
To rear left speaker
Ignition wire (Red)
Battery wire (Yellow)
Ground wire (Black) · (To car chassis)
Ignition key
switch
Car fuse box
(Main fuse)
ACC
Car fuse
box
Battery
If no connections are made, do not let the wire come out from the tab.
Power control/Motor antenna control wire
(Blue/White)
Connect either to the power control terminal when using the optional
power amplifier, or to the antenna control terminal in the vehicle.
Sub Woofer output
Mute control wire (Brown)
Rear output
To Kenwood disc changer/ External optional accessory
⁄
To connect these leads, refer to the relevant
instruction manuals.
To connect the Kenwood navigation system, consult your navigation
manual.
⁄
Connect to the terminal that is grounded when either the
telephone rings or during conversation. (KDC-HD545U only)
AUX input (Stereo)
Use the mini-plug cable which is stereo type and
does not have any resistance.
USB connector
To use the steering wheel remote control feature, you need to an
exclusive remote adapter (not supplied) matches your car is required.
Steering remote control
(Light Blue/Yellow)
Not used (Blue)
$AA-KPFD