Host application settings, Apple - logic pro 8 – KORG M50 User Manual

Page 13

Advertising
background image

10

Host application settings

The following material explains how to start up the M50 Plug-In Editor in your host application
and

select

the appropriate settings for it to operate properly. Please proceed to the specific

explanation for the system you’re using.

Apple - Logic Pro 8

1

2

Start up Logic Pro 8.

Create a Software Instrument Track, and

initialize the

“M50 Plug-In Editor.”

Software Instrument Track

3

To route the M50’s audio signal into Logic Pro 8, create an audio track or an audio AUX
track.

On

the I/O source for that track, select the audio interface input to which you’ve

connected the M50’s audio signal.

Audio Track

4

If you’re routing the M50’s audio signal to an audio track,

arm

the REC button so that you

can hear

/monitor

the audio signal.

If you are routing the M50’s audio signal to an audio AUX track, this setting is not
necessary.

Audio Track

Advertising