Fading in/out sound at tape reversal positions, D 1 * ) 1 * * ) ) : 2, Fade edit recording) – Kenwood XD-6550 User Manual

Page 57: Press so that the “pgm” indicator goes off, Recording preparations are required

Advertising
background image

XD-8550/XD-6000 (En/T)

5 7

Preparation section

Basic

section

Application section

Knowledge sections

3

1

Start edit recording.

Select the disc. (DP-MH5 only)

2

Go to step

3 before playback starts.

Recording preparations are required.

¤

¤

¤

¤

¤

For the reverse mode, select “

” ,“

[

” (two-way recording).

The tune interrupted at the end of tape side A is faded out
and side B starts with fading in from the middle of that
tune. The tune interrupted at the end of tape side B is sim-
ply faded out.

Fading in/out sound at tape reversal positions

(Fade edit recording)

When equalizer, SRS 3D or another effect is applied
to the sound, the sound with the applied effect can
be recorded.

OP

Convenient CD recording

DISC SKIP

O p π

CCRS

÷

The recording level and bias will be adjusted automatically in approx. 60
seconds (variable depending on CD contents), after which recording
starts.

÷

The CD tracks are recorded in the order they are recorded on the CD.

÷

The tape and CD stop automatically when recording has completed.

PGM

MEMO

EDIT

RDS EON

TA NEWS

INFO.

TP

PTY

TOTAL

SPACE

AUTO
TUNED

DISC

ALL

STEREO

kHz

MHz

MUTE

12

PROG.

N.B.

D 1

*

) 1

* *

) )

: 2

1

2

3

4

5

11

12 13

14

15

16

17 18

19

20

6

7

8

9

10

MAX

SLEEP

O.T.T.

ECHO

P.B.C.

EQ.
ON

MANU.

Press so that the “PGM” indicator goes off.

If your system includes the DP-H5, skip to step

3 below.

Selected disc No.

P.MODE

PGM

MEMO

EDIT

RDS EON

TA NEW

AUTO
TUNED

DISC

ALL

STEREO

C D *

MAX

SLEEP

O.T.T.

Should be OFF.

CCRS

REC / ARM

1. When the CCRS key is pressed during playback of CD, the playback stops and the CCRS setting (preparing edited recording) starts.
2. Edit recording is not possible with CDs containing a track that is longer than one tape side, which may occur with classical music, etc.
3. If the deck is set for one-side recording (

“), the processing at the tape end is applied only on side A.

4. When the last tune of tape side B is faded out, the ending part of the last but one tune may sometimes be faded out if the space between

it and the last tune is short.

During recording: X-H5

Blinks

Lights

Notes

Notes

Advertising
This manual is related to the following products: