Kenwood XD-6550 - Manual (Page 66)

XD-8550/XD-6000 (En/T)
6 6
Preparation section
Basic section
Application section
Knowledge sections
Adjust the clock before setting the timer.
Set the POWER switch to OFF (STANDBY) position.
Adjust the listening volume.
Make preparations for the play (recording).
÷
When recording radio, the listening volume is automatically set to the
minimum volume at the moment the power is turned ON by the timer.
DP-MH5 only:
The CD should be loaded
in tray No. 1 so that it can
be played by the timer.
÷
Timer reservation is possible for the two types PROG.1 and PROG. 2
at the same time.
÷
Please make reservations with an interval of at least one minute, so that
the operation times of PROG. 1 and PROG. 2 do not overlap.
Timer programming
Two 24-hour timer systems (PROG.1, PROG.2) (which can be used every day) are available.
In each of PROG.1 and PROG.2, the timer data including the operating period and played contents can be set and selected to
be activated or not as required.
1
2
3
Adjust the clock before setting the timer.
The B deck has priority at
the time of timer playback.
Timer operation
Select a program No.
4
÷
The selected program No. lights.
÷ If a program No. under which a timer program has already been
reserved, it is replaced by the new timer program.
1
VOLUME
5 ∞
2
Within 8 seconds!
ENTER
AUTO M.
MUTE
1 2
PROG. N.B.
1 2 3 4 5
11 12 13 14 15
16 17 18 19 20
6 7 8 9 10
Each press of the key switches the program numbers as follows.
1 PROG.1 ....... Program 1
2 PROG.2 ....... Program 2
3 Normal operation
EX.BASS
For recording
Make prepara-
tions for record-
ing.
¤
Playing the auxiliary input
source
Make timer setting of
the component con-
nected to the AUX or
MD jacks.
To listen to tape
Set a tape into deck B.
To listen to CD
Insert a disc.
(Program playback is
not possible.)
To listen to radio
The station should be
preset prior to the
above.
⁄
PROG.
PGM MEMO EDIT
SPACE TOTAL ST.
DISC ALL AUTO
TUNED 1 2
C-H6
display C-H5
display
Lights
Lights