Kodak 5500 - Manual (Page 18)

A-61074 April 1997 2-11
Printer messages Printer messages define the messages which may be printed by the
front document printer and/or rear document printer. The messages
defined here may be printed by including the desired message
number in the document printer print definitions using Mode
Configuration items specified in the
Front Document Printer Print
Definitions and/or Rear Document Printer Print Definitions sections.
The default is blank messages.
The message text may have up to 38 characters. The message may
contain upper- or lowercase alphanumerics and/or any other ASCII
character which appears on a standard keyboard. For information
regarding input of nonstandard (non-ASCII) characters, refer to
Appendix B, Language support.
If a message already exits, the current contents of the message
selected will appear in a line below the Print Messages Definition
area. The input cursor will be positioned at the beginning of the
message in this line.
To enter a new message:
•
Select Printer Messages from the Configuration Items window.
•
Enter your message on the next available Printer Messages line.
Msg. No.
1
2
3
4
5
6
7
8
9
Prev
Definition
Printer Messages
To change the text of an exiting message:
•
Select the desired message number.
•
Enter the text of the new message.
•
Press Enter when finished.
You will be asked to confirm the replacement of the current contents
of the message with the new message input:
Replace Msg?
•
Select Yes to confirm replacement of the old message with the
next message text in the Print Message Definition area.
•
Select No to cancel the replacement of the old message with the
new message.