Kodak 5500 - Manual (Page 46)

A-61074 April 1997 3-25
On/off Enables or disables length monitoring.
The default for all modes is Disable.
The options are:
— Disable—disables all length monitoring.
— Enable—enables all length monitoring.
NOTE: If Disable is selected, definitions for the remaining document
length monitor options will be ignored.
•
Select On/Off from the Length Monitor menu.
Single
6006
3111
Supprs
FthenR
None
Off
Off
NA NA Index Format
IA Field Width
Level Rules
IA Display Format
Adjoining IA
Batching
Length Monitor
Skew Monitor
Footswitch Patch Reader
COIN2 Port Select
OCR
Bar Code Reader
Printr Controller
Front Printer
Rear Printer
Mode Name
Overrides Off
n/a
n/a
Off
Supprs
Off
Off
MODE0
No Sav
Save & End Session
Save & Prev Menu
Don't Save & End Session
Don't Save & Prev Menu
Mode Number: 01 Mode Name: MODE01 Item #: 7.1
Mode Configuration Length Monitor
On/Off
Minimum Length
Maximum Length
Error Response
Previous Menu
Length Monitor
Disable
Enable
Previous Menu
•
Select Disable or Enable.
•
Press Enter.