Kodak 5500 - Manual (Page 5)

1-2 A-61074 April 1997
Logon procedure After the installation procedure is completed, perform the following
steps to logon to the Mode Setup Software:
1. Access DOS.
2. Change the directory to correspond to the directory designated
during the installation procedure.
3. Type SETUP and press Enter. The following screen appears:
KODAK DIGITAL SCIENCE (tm)
Scanner 5000/7000
This software is the property of
Eastman Kodak Company.
It is not to be sold or leased
in any form.
Use by any unauthorized
persons is illegal and is
subject to penalties under
the copyright laws of the
United States.
Strike any key.
Copyright
Eastman Kodak Company
1993
Version
3.20e
Release Date
Jan 10, 1997
•
Press any key to move to the next screen.
KODAK DIGITAL SCIENCE (tm)
Scanner 5000/7000
Attach RS-232 Cable to COIN1/3 Port
DIGITAL SCIENCE Power Switch On
Press <ENTER> key 1)
2)
3)
Continue
Exit
4. Verify that the RS-232 cable is connected to the COIN3 port and
the Scanner 5500/7500 power switch is in the ON position.