Kodak 5500 - Manual (Page 53)

3-32 A-61074 April 1997
Error response defines the action taken when a document skew is
detected.
The default for all modes is Display and Beep.
The options are:
— Display Error Message—results in an error message appearing
on the Operator Control Panel (E107–Doc Skew Monitor
Warning).
— Display and Beep—results in an error message appearing on the
Operator Control Panel (E107–Doc Skew Monitor Warning),
accompanied by an error tone.
— Stop, Display, & Beep—results in the transport shutting down,
and an error message appearing on the Operator Control Panel
(E204–Re-Scan-Skew Moniotr Er), accompanied by an error tone.
•
Select Error Response from the Skew Monitor menu.
Single
6006
3111
Supprs
FthenR
None
Off
Off
NA NA Index Format
IA Field Width
Level Rules
IA Display Format
Adjoining IA
Batching
Length Monitor
Skew Monitor
Footswitch Patch Reader
COIN2 Port Select
OCR
Bar Code Reader
Printr Controller
Front Printer
Rear Printer
Mode Name
Overrides Off
n/a
n/a
Off
Supprs
Off
Off
MODE0
No Sav
Save & End Session
Save & Prev Menu
Don't Save & End Session
Don't Save & Prev Menu
Mode Number: 01 Mode Name: MODE01 Item #: 8.3
Mode Configuration Skew Monitor
On/Off
Detection Range
Error Response
Previous Menu
Error Response
Display Error Message
Display and Beep
Stop, Display, & Beep
Previous Menu
•
Select the desired error response.
•
Press Enter.
Error response