Kodak 5500 - Manual (Page 80)

A-61074 April 1997 3-59
Print definition Print definition defines what information is printed by the front
printer. This is dependent upon the document level assigned to the
document being printed upon. You may choose one of five options.
These options are described below. The procedure for choosing
these options is further described on the following pages.
•
Same Format Per Level—Defines what information is printed by
the front printer on all documents, regardless of the document
level assigned to the document. You may elect to print the same
information on all documents, regardless of the document level
assigned to the document. In this case, select the Same Format
Per Level option.
You may elect to print different information on documents
assigned different document levels. In this case, select the
Level 0, Level 1, Level 2, or Level 3 options, in turn, to define the
print definitions for all valid document levels.
•
Level 0—is a valid selection when using any one of the available
index formats defined using the Index Format option. Defines
what information is printed by the front printer on documents
assigned document Level 0. The default for all modes is
Nothing
(i.e., nothing is printed on documents assigned document Level 0).
•
Level 1—This menu option is a valid selection when using any
one of the available index formats defined using the Index Format
option. Level 1 defines what information is printed by the front
printer on documents assigned document Level 1. The default for
all modes is
Full IA w/ All Delimiters. The options for Level 1 are
listed in the window.
•
Level 2—This menu option is a valid selection only when using
any of the two-level (two level or two level offset) or three-level
(three level or three level offset) index formats defined using the
Index Format option. Defines what information is printed by the
front printer on documents assigned document Level 2. The
default for all modes is
Full IA w/ All Delimiters. The options for
Level 2 are listed in the window.
•
Level 3—This menu option is a valid selection only when using
any of the three-level (three level or three level offset) index
formats defined using the Index Format option. Defines what
information is printed by the front printer on documents assigned
document Level 3. The default for all modes is
Full IA w/ All
Delimiters. The options for Level 3 are listed in the window.