Kodak 5500 - Manual (Page 82)

A-61074 April 1997 3-61
•
Select an item from the list of print definition options.
•
Press Enter. The item selected should appear in the New Print
Sequence Display Items box.
Repeat this step for each item you wish to include in the print
definition for Level 1 document.
NOTE: The front printer will print a maximum of 38 characters-per-
document. If the print definition exceeds 38 characters, only
the first 38 characters will be printed.
•
Select Previous Menu from the list of print definition options to
return to the previous window.
The vertical start print position defines how far from the leading edge
of the document(s) the information printed by the front printer will
appear.
The default for all modes is 0.250 inches / 6 mm.
The options are:
— Within the range of 0.125 inches / 3 mm minimum to 20.000
inches / 508 mm maximum.
•
Select Vertical Start Print Position from the Front Printer menu.
Single
6006
3111
Supprs
FthenR
None
Off
Off
NA NA Index Format
IA Field Width
Level Rules
IA Display Format
Adjoining IA
Batching
Length Monitor
Skew Monitor
Footswitch Patch Reader
COIN2 Port Select
OCR
Bar Code Reader
Printr Controller
Front Printer
Rear Printer
Mode Name
Overrides Off
n/a
n/a
Off
Supprs
Off
Off
MODE0
No Sav
Save & End Session
Save & Prev Menu
Don't Save & End Session
Don't Save & Prev Menu
Mode Number: 01 Mode Name: MODE01 Item #: 15.3
Mode Configuration Front Printer
On/Off
Print Definition
Vertical Start Print Position
Previous Menu
Enter Vert Start Pos
Range: 0.125 . . . 20.000
0.250
Use Arrow Keys to Set
Increase value by 0.125 inch or 1mm
Decrease value by 0.125 inch or 1mm
Increase value by 1.250 inch or 20mm
Decrease value by 1.250 inch or 20mm
•
Enter the desired distance between the leading edge of the
document and where the printed information is to appear, using the
numeric keys;
or
Vertical start print position