Konica Minolta BP-200 User Manual
Konica Minolta Photo Accessories
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- Contents
- Introduction
- 1 Features
- 2 Setup
- 2.1 Connecting to a LAN
- 2.2 Specifying the network settings
- 2.3 Basic Settings
- 2.4 DNS Settings
- 2.5 Machine Name
- 2.6 SMTP Settings
- 2.7 POP3 Settings
- 2.8 Priority Compress Level (E-Mail Mode)
- 2.9 Priority Compress Level (Scan Mode)
- 2.10 Scanner Settings
- 2.11 LDAP Setting
- 2.12 IP Filtering
- 2.13 Specifying e-mail server settings
- 2.14 Entering a domain name
- 2.15 Checking the network connection (Ping)
- 2.16 User authentication and account track
- 3 Scan to E-Mail
- 3.1 Specifying a destination with a one-touch dial button
- 3.2 Entering an address
- 3.3 Specifying the scanning quality and zoom ratio
- 3.4 Specifying additional functions
- Specifying the transmission report printing conditions
- To specify the transmission report printing conditions
- Specifying 2in1 transmission
- Specifying double-sided transmission
- Specifying priority transmission
- Specifying timer transmission
- Specifying the stamp setting
- Changing the subject
- Specifying a reply address
- Specifying a file name
- Other functions
- 3.5 If transmission could not be completed
- 3.6 Registering destinations
- Programming a one-touch dial button
- To program a one-touch dial button
- Changing or deleting a one-touch dial button
- Copying a one-touch dial button
- Registering/deleting a secondary destination
- Naming an index
- To name an index
- Registering mail programs
- To register a mail program
- Changing/deleting a mail program
- 4 Scan to FTP
- 4.1 Specifying a destination with a one-touch dial button
- 4.2 Specifying the scanning quality and zoom ratio
- 4.3 Specifying additional functions
- Specifying the transmission report printing conditions
- To specify the transmission report printing conditions
- Specifying 2in1 transmission
- Specifying double-sided transmission
- Specifying priority transmission
- Specifying timer transmission
- Specifying the stamp setting
- Specifying the e-mail notification destination
- Specifying a file name
- 4.4 If transmission could not be completed
- 4.5 Registering destinations
- 5 Scan to SMB
- 5.1 Specifying a destination with a one-touch dial button
- 5.2 Specifying the scanning quality and zoom ratio
- 5.3 Specifying additional functions
- Specifying the transmission report printing conditions
- To specify the transmission report printing conditions
- Specifying 2in1 transmission
- Specifying double-sided transmission
- Specifying priority transmission
- Specifying timer transmission
- Specifying the stamp setting
- Specifying the e-mail notification destination
- Specifying a file name
- 5.4 If transmission could not be completed
- 5.5 Registering destinations
- 6 Internet faxing
- 6.1 Specifying a destination with a one-touch dial button
- 6.2 Entering an address
- 6.3 Specifying the scanning quality and zoom ratio
- 6.4 Specifying additional functions
- Specifying the transmission source setting
- Specifying the transmission report printing conditions
- Specifying 2in1 transmission
- Specifying double-sided transmission
- Specifying rotation transmission
- Specifying priority transmission
- Specifying timer transmission
- Specifying the stamp setting
- Changing the subject
- Specifying a reply address
- Specifying a file name
- 6.5 If transmission could not be completed
- 6.6 Receiving Internet faxes
- 6.7 Registering destinations
- 7 Using an LDAP server
- 8 Specifying settings using PageScope Web Connection
- 8.1 Items that can be specified using PageScope Web Connection
- 8.2 Using PageScope Web Connection
- 8.3 One-Touch Key Registration (User mode)
- 8.4 FAX Program Registration (User mode)
- 8.5 Domain Name Registration (User mode)
- 8.6 Export/Import (Administrator mode)
- 8.7 TSI Registration
- 8.8 TX Settings (Administrator mode)
- 8.9 RX Settings (Administrator mode)
- 8.10 Scan Setting (Administrator mode)
- 8.11 TX Document (Administrator mode)
- 8.12 RX Document (Administrator mode)
- 8.13 Report Settings (Administrator mode)
- 8.14 TCP/IP (Administrator mode)
- 8.15 IP Filtering
- 8.16 LDAP (Administrator mode)
- 8.17 LDAP Server Setting (Administrator mode)
- 8.18 E-Mail/Internet FAX (Administrator mode)
- 8.19 FTP Configuration (Administrator mode)
- 8.20 SNMP
- 8.21 SSL/TLS (Administrator mode)
- 8.22 User Authentication (Administrator mode)
- 9 Specifying management settings
- 9.1 Available parameters
- 9.2 Registering transmission source names
- 9.3 Specifying transmission report settings (TX Settings)
- 9.4 Specifying the print timing for received documents (RX Settings)
- 9.5 Specifying the transmission report printing conditions (Report Settings)
- 9.6 Forwarding a transmission document to a specified destination (TX Forwarding)
- 9.7 Specifying the processing method for received docu ments (Document Management)
- 9.8 Specifying software switch settings (machine func tions)
- Software switch settings
- To specify a software switch setting
- Specifying whether or not the destination name is inserted (mode 001)
- Specifying settings for address input and broadcast transmissions (mode 018)
- Specifying settings for the image in the results report (Mode 023)
- Specifying administrator forwarding settings (mode 198)
- Blocking calls from callers that are not specified (mode 306)
- Specifying Internet fax settings (mode 350)
- Specifying whether to add the transmission source information when faxing or when forwarding received documents (mode 352)
- Specifying SMTP transmission timeout settings (mode 356)
- Specifying SMTP reception timeout settings (mode 357)
- Specifying POP3 reception timeout settings (mode 358)
- Specifying the default address input screen (mode 366)
- Specifying DNS query timeout setting (mode 367)
- Including the scan transmission log in the activity report (mode 368)
- Specifying switching of the SMTP server (mode 371)
- Specifying the transmission interval when e-mail messages are sepa rated (mode 372)
- Specifying the Internet fax full mode function settings (mode 373)
- Specifying e-mail security functions (mode 380)
- Specifying use of registered user authentication information to log on to the LDAP server (mode 466)
- Specifying whether to enable access locks, and whether to enable the password rules (mode 469)
- Specifying the export file format (mode 470)
- Specifying settings to limit the use of communication modes-1 (mode 475)
- Specifying settings to limit the use of communication modes-2 (mode 476)
- Specifying settings to limit the use of communication modes-3/Specify ing restrictions for registering fax addresses and printing reports and specifying how one-touch dial recipients are displayed (mode 477)
- Specifying the deleting method for [Del.] in input screens (mode 478)
- Specifying settings for limiting user authentication to only Scan func tions (mode 479)
- 9.9 Specifying SSL/TLS settings
- 10 Reports and lists
- 11 Scan function troubleshooting
- 12 Appendix