KVH Industries TracPhone F55 - Manual (Page 20)

Hardware Interfaces Introduction
2.3 Hardware Interfaces
The Transceiver Unit of the SAILOR Fleet33 has the
following hardware interfaces:
• Analogue RJ11 number 1
2
• Analogue RJ11 number 2
• Handset (4 wire)
• Ethernet
• RS-232
• 4 Discrete I/O
• Power Connector
All connectors for these interfaces are found on the rear of
the Transceiver Unit.
Two Analogue RJ11 interfaces:
The RJ11 ports as shown above can be used for connection
of analogue phones and G3 fax machines.
Selection of service for the interfaces is independent of
each other. If the mini-M voice is selected, a phone must
be connected as only voice connections can be established.
Cradle/Handset interface:
May 2005 9