KVH Industries TracPhone F55 - Manual (Page 83)

PC Programs System Set-up using FleetCP
5.1.5 Routing
To route calls, use the table in the Routing window. Click in
the cell that correspond to service/interface that is to be
changed. Click the * or # button in lower part of the screen
to define it as a incoming or outgoing call. To add a IMN,
click the New IMN/ID button. See picture.
See section 4.4.2 Routing and IMN Config in the
Installation manual for a detailed explanation about
routing, IMN and ID's.
5
72 May 2005