Kenwood ProTalkXLS TK-3230 - Manual (Page 37)

8
S
elcAll
(S
elective
c
Alling
)
A Selcall is a voice call to a particular station or group of
stations. Each transceiver is set up with an individual ID
number for use with selcalls.
There are several types of Selcalls available: Individual, Group,
and Broadcast.
•
Individual Calls are calls made to individual parties .
• Group Calls are calls made to all parties within a group .
• Broadcast Calls are calls made to all parties in all groups .
The default status of the transceiver does not allow you to
make a Selcall. Use the following procedures to set up your
transceiver to allow Selcalls:
Step : Activate the FleetSync Optional Signaling
 With the transceiver power OFF, press and hold the MENU
key while turning the transceiver ON (for 1 second).
 Press the or key to select “ ” (Optional Signaling).
 Press the MENU key then press or to select “ ”
(FleetSync).
• After setting the Optional Signaling to FleetSync, you will no
longer be able to receive calls except selcalls.
 Press the MENU key to confirm the selection.
 Press the PTT, MON, or CAL key to exit Setting Mode.
Step : Set up the CAL key
 With the transceiver power OFF, press and hold the MENU
key while turning the transceiver power ON (for 1 second).
 Press the or key to select “ ”.