Kodak SERIES I 4700 - Manual (Page 13)

Photo Printer 4700 Series 13
Removing the Ribbon Cartridge
1. Place your finger in the opening at the top of the ribbon cartridge door. Pull the
door toward you to open it.
2. Push up on the green lever to release the ribbon cartridge.
3. Remove the cartridge. Slide the new ribbon cartridge, with the smooth,
finished side facing you, into the open slot. (The ribbon cartridge only fits one
way in the open slot.) Push the cartridge into the printer until it locks in place.
NOTE: Images remain on the ribbon after printing. If you need to maintain
confidentiality, dispose of the ribbon cartridge appropriately.
4. Close the door.