KTI Networks KCD-300 - Manual

Specifications :
Industrial 10/100Base-TX to
100Base-FX Media Converters
The industrial KCD-300 media converter series provides industrial strength Ethernet copper-to-fiber
media conversion, allowing for 10Base-T-100Base-FX or 100Base-TX-100Base-FX over multi-mode
or optional single-mode fiber optical media.
Benefits :

Comprehensive configuration settings to increase flexibility for application needs

Wide operating temperature range for temperature critical environment

Support DIN rail mounting and panel mounting

Provide two power input types to meet more application needs

Accept wide power input voltage range for application flexibility

Industrial-rated Emission and Immunity performance
Key Features :

Support full wire speed conversion for 10/100 speed and media types

Support auto-negotiation 10/100Mbps or forced mode on TP copper port

Auto MDI/MDI-X crossover function on the TP copper port

Provide Link Fault Pass Through function

Provide comprehensive manual configuration settings

Transparent conversion to 802.1Q VLAN tagged packets

Provides Far End Fault function on FX (fiber) port

Low power consumption

Two power interface types: screw terminal block and DC Jack

Supports wide power input voltage range

Supports DIN rail mounting and optional screwed plane mounting

Supports wide operating temperature range

Industrial-rated Emission and Immunity performance
Conversion 10BASE-T to 100BASE-FX
100BASE-TX to 100BASE-FX
Conversion Methods Smart-forward mode :
- Store-and-forward for 10M to 100M
- Direct conversion for 100M to 100M
Store-and-forward always mode
Packet Types Transparent conversion with no modification to :
- Standard IEEE 802.3 Ethernet packet frames
- IEEE 802.1Q tagged packet frames
TP Port Shielded RJ-45 jack
Auto MDI/MDI-X crossover function
Auto-negotiation function for speed and duplex mode
Full-duplex and half-duplex support
10Mbps - supports Cat. 3,4,5 UTP cable up to 100m
100Mbps - supports Cat. 5 UTP cable up to 100m
KCD-300
DIN Rail Mounting Bracket
Panel Mounting Bracket
080110