KITCHENAID KAWS750J - Manual (Page 8)

8
Models KAWS750J, KAWS850J and KAWS855J
Normal cycle
The Normal cycle is used with the Fabric Select option to provide
the best wash and spin action for a given load. Select 6, 10 or 12
minutes of wash time depending on whether your load is lightly,
moderately or heavily soiled.
Extra Wash – Select the 16-minute Extra Wash feature to wash
heavily soiled loads that need maximum soil removal. Use two
times the amount of recommended detergent for this cycle.
Wrinkle Resist/Permanent Press cycle
The Wrinkle Resist/Permanent Press cycle is used with the Fabric
Select option to provide the best wash and spin action for a given
load. The Wrinkle Resist/Permanent Press cycle features a pause
and cool down rinse to reduce wrinkling. Use 6 or 10 minutes of
wash time for lightly to moderately soiled loads.
Soak cycle
The Soak cycle features brief periods of agitation and soak time
to help remove heavy soils and stains that need pretreatment.
■ Use warm water when soaking laundry. Hot water can set
stains.
■ Use the amount of detergent or presoak additive
recommended by the manufacturer.
■ The Soak cycle automatically advances into the Pre-Wash
cycle.
Pre-Wash cycle
The Pre-Wash cycle features 4 minutes of agitation to help
remove heavy soils and stains that need pre-treatment. When the
Pre-Wash period ends, add detergent and start a new wash
cycle.
Additional Fabric Select options available on the
KAWS850J and KAWS855J models
Sweaters option
Use this option to gently clean non-wool sweaters.
To use this option
1. Turn the FABRIC SELECT option to SWEATERS.
2. Set the TEMPERATURE selector to the SENSORSURE ®
COLD/COLD setting.
3. Set the Cycle Control knob to a 6-minute Normal wash cycle.
Handwash option
Use this option to gently clean washable wool garments (refer to
your garment’s care label).
To use this option
1. Turn the FABRIC SELECT option to HANDWASH.
2. Set the TEMPERATURE selector to the SENSORSURE ®
COLD/COLD setting.
3. Set the Cycle Control knob to a 6-minute Normal wash cycle.
SENSORSURE ® Temperature Control
SENSORSURE temperature control electronically senses and
maintains a uniform water temperature by regulating incoming
hot and cold water.
SENSORSURE control keeps warm and cold water temperatures
within recommended ranges for best detergent performance and
fabric care.
■ Cold wash is regulated at approximately 75°F (24ºC).
■ Warm wash is regulated at approximately 100°F (38°C).
To select SENSORSURE control
Turn the TEMPERATURE selector to a SENSORSURE setting.
Rinse and Spin
When using extra detergent for heavily soiled clothes, or washing
special-care items, you may find an extra rinse and spin is
needed.
1. Push in the Cycle Control knob and turn it clockwise to any of
the Rinse settings.
2. Pull out the Cycle Control knob. The washer fills to the
selected load size, agitates, drains, and spins.
NOTE: An Extra Rinse option is available (on some models). See
“Starting Your Washer.”
Drain and Spin
A drain and spin may help shorten drying times for some heavy
fabrics or special-care items by removing excess water.
1. Push in the Cycle Control knob and turn it clockwise to any of
the Spin settings.
2. Pull out the Cycle Control knob. The washer drains, then
spins.
WASHER CARE
Cleaning Your Washer
Cleaning the exterior
Use a soft, damp cloth or sponge to wipe up any spills such as
detergent or bleach. Occasionally wipe the outside of your
washer to keep it looking new.