Kenwood TH78E User Manual

Page 32

Advertising
background image

8 DTMF Memory

You can store 10 DTMF telephone numbers up to a

maximum of 15 digits long in memory.

Storing DTMF Codes

1

Press the M key, then press the MHz key to select

the DTMF code entry mode.

2 Enter the DTMF code on the keypad

3 Press the MR key after entering the DTMF code.

4 Select the channel (O-9) where you want to store

the DTMF code and press the key for that channel.
The DTMF code is stored and the previously

displayed frequency reappears.

5 If you enter the wrong number, press the VFO key to

start over from step 1.

6 To stop during entry, press the BAND key. The

previously displayed frequency appears on the
display.

Recalling Stored DTMF Codes in Receive Mode

1

Press and hold the F key for longer than one
second, then press the MHz key.

2 Press a number key (O-9). The corresponding

stored DTMF code is displayed.

33

Advertising
This manual is related to the following products: