KORG Krome music workstasion 61key - Manual (Page 102)

Drum Track function
98
If the Global P1: MIDI– MIDI Basic page MIDI
Clock parameter is set to External MIDI, External
USB, or set to Auto and MIDI Clock messages are
being received, the display will indicate “ =” EXT,
and the KROME will be synchronized to an
external MIDI device. In this case, you won’t be
able to change the tempo by using the KROME.
Selecting a Drum Track pattern and
Drum Track program
1. Access the Prog P0: Play– Main page.
2. Select a Drum Track pattern. Use “Pattern Bank”
to select the preset or the user bank, and use
“Pattern No.” to select the pattern number.
3. Use “Drum Track Program” to select the program
that will play the Drum Track pattern.
Note: You can only select programs of category
number 15 (Drums). If you want to use an original
program you created as the Drum Track program, save
it with “Category” set to 15 (see page 30).
Note: If you’ve selected an empty pattern, the DRUM
TRACK button will not function.
These parameters can also be set from P7: ARP/DT
page.
Setting the EQ, volume, mute, and
solo for the drum track pattern
In the Prog P0: Play– Mixer & Drum Track page you
can use a 3‐band EQ to adjust the sound of the drum
track program. You can also edit the volume, mute,
and solo settings.
Using the Drum Track function
in Combination mode
Selecting a combination and turning the
Drum Track function on/off
1. Press the COMBI button to enter Combination
mode, and select the desired combination. For
details, please see “Selecting Combinations” on
page 43.
2. Press the DRUM TRACK button.
The ON/OFF button will light up or blink, depending
on the setting (Trigger Mode) of the combination.
If lit: The Drum Track pattern will start according to
the Sync setting. When you turn it off, the pattern will
stop. (This will occur if the Trigger Mode parameter is
set to Start Immediately.)
If blinking: The Drum Track pattern will be ready to
start. It will start when you play the keyboard or when
a MIDI note‐on is received. (This will occur if the
Trigger Mode is set to Wait KBD Trigger.)
Adjusting the performance tempo
You can use the TEMPO knob or the TAP button to
adjust the performance tempo.
Selecting a Drum Track pattern and Drum
Track program
Unlike its functionality in Program mode, the Drum
Track function in Combination mode does not have its
own dedicated track (timbre). The program that plays
the Drum Track pattern will use the timbre that you
specify.
1. In the Combi P0: Play– Program T01–08 page or
T09–16 page, select the timbre that you want to use
for the drum track, and then select the Drum Track
program.
Pattern
Bank/No.
Drum Track
Program
Drum Track Play/Mute, Solo On/Off, Volume
Drum Track
EQ