KORG Krome music workstasion 61key - Manual (Page 63)

Recording Preparations for recording
59
This dialog box is the same as the one that appears for
the Copy To Track (P10: Pattern/RPPR– Pattern Edit)
menu command.
5. In the “Pattern” field, select the pattern that you
want to copy.
In the To Track field, select the copy‐destination track.
In the Measure field, specify the starting measure of
the copy‐destination.
Following the pattern name for each of the 605 preset
patterns, the musical style and the name of the most
suitable Drums category program are partially
displayed.
By loading a drums track and the corresponding preset
pattern, you can instantly set up a drum track
appropriate for each preset template song.
6. To execute this operation, press the OK button.
When you execute this procedure, the Measure field
will count up automatically, showing how many
measures of the selected pattern have been placed in
the selected song. You can then copy another pattern if
desired, or add more measures of the same pattern.
When you’re finished, press the Exit button.
Copying the settings of a combination
or program
You can copy the settings of a combination or program
into the sequencer.
This can be done in the following ways.
• Auto Song Setup
Auto Song Setup is a function that copies the
settings of the selected combination (in
Combination mode) or program (in Program mode)
to the song in Sequencer mode.
• Menu commands Copy From Combi or Copy From
Program. (See pages 166, 167 of the Parameter
Guide)
In Sequencer mode, you can use these page menu
commands to copy the desired settings.
Auto Song Setup function
1. Enter Combination mode.
2. In P0: Play page, select the desired combination
and edit the Arpeggiator etc. as desired.
Note: If you want to save the edited state of the
combination, use the Write Combination menu
commands.
3. Press the REC ( ●) button. Alternatively, select the
page menu command “Auto Song Setup.”
The Setup to Record dialog box will appear.
4. To execute the Auto Song Setup function, press the
REC (
●) button or the OK button. If you decide
not to execute, press the Cancel button.
You will automatically move to Sequencer mode, and
the settings of the combination will be copied to the
song.
The first unused song will be the copy‐destination
song.
Contents automatically copied from a combi-
nation
The copied contents will be the same as when you
execute the menu command Copy From Combi with
the following settings in the dialog box. (See page 166
of the Parameter Guide)
• IFXs, MFXs, TFX checked
• Auto Adjust Arp setting for Multi REC checked
Contents automatically copied from a pro-
gram
The copied contents will be the same as when you
execute the menu command Copy From Program with
the following settings in the dialog box. (See page 167
of the Parameter Guide)
• IFXs, MFXs, TFX checked
• Arp checked
• To set to Track 01
• Arp set to A
• with Drum Track checked
• To: Drum Track set to Track 10
• Check Recording Setup Multi REC
• Set the Play/Rec/Mute setting to REC for tracks 01
and 10 (see page 101 of the Parameter Guide).
5. The KROME will automatically enter record‐ready
mode, and the metronome will sound according to
the Metronome setting (See page 119 of the
Parameter Guide).
6. Press the START/STOP ( ) button to begin
realtime recording. To stop recording, press the
START/STOP (
) button once again.