Rear panel, Power supply, Audio outputs – KORG Krome music workstasion 61key User Manual

Page 7: Pedals, Midi

Advertising
background image

Front and rear panels Rear panel

3

Rear panel

1. Power supply

Be sure to see “Turning the power on” on page 15 and 
follow the correct procedure described there.

Note: The KROME has an auto power‐off function that 
automatically turns off the power when the keyboard 
or front panel buttons have not been used for a certain 
length of time. With the factory settings, this is set to 4 
hours (see “Auto power‐off function” on page 16).

Power switch

This switch turns the power on/off. (See page 15)

AC adapter connector

The included AC adapter is connected here. 
(See page 15)

Connections must be made with the power turned 
off. Please be aware that careless operation may 
damage your speaker system or cause 
malfunctions.

Cable hook

Use this to secure the cable of the included AC adapter. 
After connecting the AC adapter, loop the cable 
around the hook located on the KROME’s rear panel so 
that the cable won’t get pulled out inadvertently. Leave 
enough slack on the plug end so that you can 
disconnect it if you want to. (See page 15)

Be careful not to bend the base of the plug any 
more than necessary.

2. AUDIO OUTPUTS

AUDIO OUTPUT L/MONO & R

jack

These are the stereo audio outputs. Use the VOLUME 
knob to adjust the volume. (See page 17)

3. PEDALS

You can connect a damper pedal, foot switch, and foot 
pedal to these jacks. This gives you a broader range of 
functions and effects to control. (See page 18)

ASSIGNABLE PEDAL jack
ASSIGNABLE SWITCH jack
DAMPER jack

4. MIDI

MIDI lets you connect the KROME to a computer or 
other MIDI devices, for sending and receiving notes, 
controller gestures, sound settings, and so on. (See 
page 20)

MIDI IN connector
MIDI OUT connector

5. SD

SD card slot

You can insert an SD card here, and use it to save/load 
KROME programs, combinations, or song data. (See 
page 118)

6. USB

USB connector
(for connecting to computer)

You can connect your computer to this connector. 
Using a single USB cable, your KROME can send and 
receive MIDI information directly to and from a 
computer, without requiring a MIDI interface. (See 
page 20)

Note: The USB connector of the KROME is only able to 
transmit and receive MIDI data.

1

2

4

5

6

3

Advertising
This manual is related to the following products: