KORG Krome music workstasion 61key - Manual (Page 74)

Creating songs (Sequencer mode)
70
The copy will be executed.
5. If desired, you can press another copy‐destination
to copy the data repeatedly.
Example) Copying the data of an entire track
You can copy the data of an entire track to another
track.
Refer to “Example) Moving the data of an entire track.”
In step 2, choose the tool.
Piano Roll Editing
Piano Roll editing lets you enter, edit, or delete event
data such as notes, velocities, and control changes.
1. In the Seq P6: Track Edit‐ Track View page, specify
the track and measure that you want to edit.
2. Select the tool in the Track View page or select
“Piano Roll” from the menu commands to access
the Piano Roll window. (See illustration below)
3. Make sure that the events you want to edit are
displayed in the note view area at the upper part
of the window or in the control view area at the
lower part of the window.
• Press the note view area selector, and use the value
controllers.
• Select the tool, and drag.
• Enter “Meas” or “#” in the event list.
• Use the view control zoom buttons to zoom‐in/out.
• Switch the view area height selector.
4. Use the tool box to select a tool, and edit the data.
Note: If you want to undo an edit, press the Undo
button.
5. To play back the events, press the Play button. A
dialog box will open, and the song will start
playing. This allows you to check the results of
your editing.
6. You can change settings such as the note
resolution. Press the Setup button, and adjust the
settings in the Piano Roll Setup dialog box.
7. When you’re finished editing, press the Done
button.
5
Control view area
Event list
Note view area
Note view area select
Note events
View area height select
Zoom
Scroll (view control)
The selected note event
Enter notes.
Delete notes.
Switch the note event
display
Ends piano roll editing
Move the note view
area that is displayed.
Select what will be
shown in the control
view area. (In this
example, velocity values
are shown.)
The Piano Roll Setup dialog
box will appear when you
press the Setup button
(->see Piano Roll Setup). Undo cancels the
preceding edit. Redo
returns to the state prior
to Undo. Plays back the song. The Piano Roll
Edit Play dialog box will appear
when you press this button
( Piano Roll Edit Play).
Toolbox:
Select or move a note.
Change the length of notes.