Set up your network at a later time, Viewing pictures over your wireless network – Kodak EX-811 User Manual

Page 28

Advertising
background image

21

www.kodak.com/go/support

Using Wi-Fi mode—EX models only

Set up your network at a later time

The first time you turn on your frame, the Network connection screen appears and
asks if you want to connect your frame to a wireless network. You can answer No and
perform the setup at a more convenient time.

1 Press

, then go to Settings

Manual

Enable/Disable connections.

2 Select Enable, then press the Back button.

3 Select Network again, then Scan for wireless networks.

4 Continue with step 4 of the setup directions on

page 20

.

Viewing pictures over your wireless network

Pictures are accessed from your computer via Windows Media Player 11. To make
sure you have version 11, install the software from the CD that was packaged with
your frame (see

page 1

).

1 Turn on your computer and your picture frame. Then press Home

.

2 Press

to highlight your network computer, then press OK.

If you have multiple computers on your network, first select Network Computer

, then select the computer from the list.

NOTE: The first time you connect, a window may appear on your computer screen alerting you to a new

device. Follow the prompts to "allow" the frame on your computer.

3 Follow the prompts to choose the pictures, then press OK.

Pictures are displayed as thumbnails. Press

to play a slide show.

If your network computer is not listed on the Home screen, or for more
information, go to the troubleshooting help on

page 29

of this guide or visit

www.kodak.com/go/digitalframesupport

.

Advertising
This manual is related to the following products: