Kodak SCAN STATION 100 - Manual (Page 108)

A-61588 July 2008 7-3
Saving error log files You may be asked by Kodak Service personnel to send the log files as
an email attachment for further diagnostics. If you are asked to provide
these log files, proceed as follows:
1. Create an administrative configuration file on a new USB flash drive.
2. Insert the flash drive into the Scan Station’s USB port to put the
Scan Station into local administrative mode. The Scan Station will
display the Settings mode icons.
3. Using the arrows, scroll until the Diagnostics icon is displayed
and selected.
4. Click Save Logs and click Yes to save the log file to the flash drive.
NOTE: The following files will be saved to the flash drive: analog.log
and kss100.xml.log.