Kodak SCAN STATION 100 - Manual (Page 21)

A-61588 July 2008 3-5
Configuring your
Scan Station This section provides procedures for configuring your Scan Station to
connect to your office network environment. You will need to enter
network-specific settings. This information should already be filled in on
the Pre-installation Checklist in Chapter 2.
NOTE: Using the PC keyboard to enter information is faster than
clicking letters and numbers on the virtual keyboard/keypad.
1. Double-click the Configuration Organizer icon on your desktop to
launch the application. Because you are setting up the Scan Station,
select the Administrator option under the File menu.
2. Click the Settings button to display the Configuration screen.