Kodak SCAN STATION 100 - Manual (Page 82)

4-26 A-61588 July 2008
Specifying Proxy settings If your company requires the use of a proxy server before
communicating with an FTP site, you must define these proxy settings
by clicking on the Proxy button. The Proxy Settings dialog box will be
displayed.
1. Select the Proxy Type. USER after login and None are the only
two supported options at this time.
2. If USER after login is selected, the rest of the fields are available.
Enter the Proxy Address in the form of a Fully Qualified Domain
Name (e.g., FTP.acme.com) or as an IP address.
3. Enter the Username and Password required to access the proxy
server.
4. If the proxy server is configured to communicate on a port other
than Port 21, change or enter the value using the up and down
arrows or keyboard.
5. Click OK.