Samsung DS5021D - Manual (Page 52)

Page 38 © SAMSUNG Electronics Co., Ltd.
BASIC FEATURES
Busy Station Callback
When the called station is busy, you can set a busy station callback. When the busy station becomes free,
your Digital phone will ring. If you pick up the Digital phone, the other station will begin to ring.
1.
When you hear a busy signal, press the
[CBK] button or dial [4] [4]. Or, press
the Soft button corresponding to
[CBK] on the LCD panel.
2.
When you hear the confirmation signal,
replace the handset.
3.
When the reserved station becomes
free, your Digital phone rings.
The ‘CALL BACK’ message will appear
on the LCD screen.
4.
Lift the handset or press
the [Speaker] or [Send] button to
call the now idle station.
5.
To end the call, replace the handset
or press either the [Speaker] or [End] button.
- If you do not answer the Callback within 30 seconds, the callback will be cancelled.
If a callback is set up, the [CBK] button’s LED, if programmed, will light.
[CBK]
CALL BACK
NOTE