Kenwood DPX304 - Manual (Page 45)

English |
45
Demonstration mode Setting
Turning the demonstration mode ON/OFF.
1
Enter Function setting mode
Press the [VOL] knob.
2
Enter Demonstration mode setting
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “DEMO Mode”/ “DEMO MODE”.
3
Set the Demonstration mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “ON” or “OFF”.
4
Exit Function setting mode
Press the [ ] button for at least 1 second.
Muting volume upon reception of
Phone call
The audio system automatically mutes upon
reception of an incoming call.
When a call comes in
“CALL” is displayed.
The audio system pauses.
Listening to the audio during a call
Press the [SRC] button.
The “CALL” display disappears and the audio system
comes back ON.
When the call ends
Hang up the phone.
The “CALL” display disappears and the audio system
comes back ON.
⁄
• To use the TEL Mute feature, you need to hook up the MUTE
wire to your telephone using a commercial telephone
accessory. Refer to <Connecting Wires to Terminals> (page
10) of Quick start guide.