Kenwood DPX304 - Manual (Page 52)

52
| DPX504U/ DPX404U/ DPX304
Audio Adjustments – DPX404U/ DPX304 –
Function of DPX404U/ DPX304
“DETAILED SET”
“LPF
SUBWOOFER”
Selects cut off frequency of subwoofer output.
“85”/ “120”/ “160”/ “THROUGH” (OFF) Hz
“SUB-W PHASE” Selects the phase of subwoofer output.
“REVERSE” (180°)/ “NORMAL” (0°)
“SUPREME SET” Turns on/off the supreme function.
Can be set while Audio file source of CD/ USB
(excluding iPod).
“ON”/ “OFF”
“VOLUME
OFFSET”
Sets each source’s volume as a difference from
the basic volume.
“–8” — “0” (AUX: “–8” — “0” — “+8”)
( : Factory setting)
1
Select the source
Press the [SRC] button.
Select a source other than “STANDBY”.
2
Enter Function setting mode
Press the [VOL] knob.
3
Enter Audio Control mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “AUDIO CONTROL”.
4
Select the setting item to adjust
Turn the [VOL] knob and press it when the
desired item is displayed.
5
Make a setting
Turn the [VOL] knob to select a setting value,
and then press the [VOL] knob.
6
Exit Function setting mode
Press the [ ] button for at least 1 second.
⁄
• The “SUB-W PHASE” item can be made when a setting other
than “THROUGH” is selected for the “LPF SUBWOOFER” item.
Remarks
• Supreme
Technology to extrapolate and supplement with
proprietary algorithm, the high-frequency range that is
cut off when encoding at low bit rate (less than 128Kbps,
Sampling frequency is 44.1kHz).
Supplementing is optimized by compression format (MP3,
WMA and AAC) and processed according to bit rate. The
effect is negligible with music that is encoded at high bit
rate, variable bit rate or has minimal high frequency range.
Audio Control
You can adjust the following Audio Setting items.
Display Overview
“AUDIO CONTROL”
“SUBWOOFER SET” Turns on/off the subwoofer output.
“OFF”/ ”ON”
“SYSTEM Q” Switches between the following preset
equalizer curves.
“NATURAL”/ “USER”/ “ROCK”/ “POPS”/
“EASY”/ “TOP40”/ “JAZZ”/ “GAME”
For USER: This appears when Bass level,
Middle level, and Treble level are
adjusted.
“BASS ADJUST” You can set bass for each source.
“BASS FREQ” Bass Center Frequency
40/50/60/70/80/100/120/150 (Hz)
“BASS LEVEL” Bass level
“–8” — “0” — “+8”
“BASS Q” Bass Q Factor
1.00/1.25/1.50/2.00
“BASS EXT” Bass Extend
”ON”/ “OFF”
“MID ADJUST” You can set middle for each source.
“MID FREQ” Middle Center Frequency
0.50/1.00/1.50/2.00 (kHz)
“MID LEVEL” Middle level
“–8” — “0” — “+8”
“MID Q” Middle Q Factor
1.00/2.00
“TRE ADJUST” You can set treble for each source.
“TRE FREQ” Treble Center Frequency
10.0/12.5/15.0/17.5 (kHz)
“TRE LEVEL” Treble level
“–8” — “0” — “+8”
“BALANCE” Adjusts left/right speaker balance.
(Left) “L15” — “0” — “R15” (Right)
“FADER” Adjusts front/rear speaker balance.
(Rear) “R15” — “0” — “F15” (Front)
“SUB-W LEVEL” You can set subwoofer level.
“–15” — “0” — “+15”
SRC
VOL