Konica Minolta BIZHUB 210 - Manual (Page 101)

Before making copies 3
bizhub 162/210 3-55
To make copies after specifying a copy density
1
Position the documents.
For details refer to “Loading the document” on page 4-10.
2
Press the [Auto/Photo] key to select
between the
TEXT/P[A] (AUTO),
TEXT[A] (AUTO), PHOTO ,
TEXT/P , or TEXT settings.
The current setting appears on the
left side of the screen.
3
If the PHOTO , TEXT or TEXT/P set-
ting was selected, press the [
*] and
[
)] keys to adjust the density level.
4
Specify the desired copy settings.
For details, refer to “Making a basic
copy” on page 4-3.
5
Using the 10-key pad, enter the
number of copies to be made.
6
Press the [Start] key.
This will start the copy cycle.
When making copies with a
light density level
When making copies with a
darker density level