Konica Minolta BIZHUB 210 - Manual (Page 151)

Advanced copy operations 6
bizhub 162/210 6-7
5
Specify the desired copy settings.
For details, refer to “Making a basic copy” on page 4-3.
6
Using the 10-key pad, enter the number of copies to be made.
7
Press the [Start] key.
This will start the copy cycle.
2
Note
The default binding setting is for left-bound books. To copy right-bound
books, change the document type using the binding position function.
For details, refer to “Specifying BINDING POSITION” on page 7-35.
There are three erase settings available:
Erase setting Explanation Finishing
FRAME The pages are copied with a blank
area framing the text.
CENTER The pages are copied with a blank
area along the binding.
BOTH The pages are copied with blank
areas framing the text and along
the binding.
Documents Copies
Documents Copies
Documents Copies