Konica Minolta BIZHUB 210 - Manual (Page 159)

Advanced copy operations 6
bizhub 162/210 6-15
Specifying finishing settings (sorting using the original glass)
1
Open the document feeder or original cover.
2
Place the document on the original
glass.
For details refer to “Loading the doc-
ument” on page 4-10.
3
Press the [Finishing] key until Sort is
selected.
The “Sort” indicator lights up.
? Are neither the sort nor the group
indicators lit?
% The non-sort function is selected.
4
Using the 10-key pad, enter the
number of copies to be made.
5
Press the [Start] key.
This will start the copy cycle.
6
Place the next document page on
the original glass, and then press the
[Yes] key.
– Repeat this step for all pages of
the document.
– The number of document pages
that have been scanned is displayed.
7
After all document pages have been scanned, press the [Start] key.