Specifying density level (a), Specifying density level (m) – Konica Minolta BIZHUB 210 User Manual
Page 202
Advertising
7
Using the utility mode
7-34
bizhub 162/210
Specifying DENSITY LEVEL (A)
1
Select
DENSITY LEVEL (A)
in the
COPY SETTING 1 menu.
For details refer to page 7-31.
2
Press the [
*] and [)] keys to select
one of the three print density levels
between
LIGHT
and
DARK
.
3
Press the [Yes] key.
The COPY SETTING 1 menu appears
again.
Specifying DENSITY LEVEL (M)
1
Select
DENSITY LEVEL (M)
in the
COPY SETTING 1 menu. For details
refer to page 7-31.
2
Press the [
*] and [)] keys to select
one of the nine print density levels
between
LIGHT
and
DARK
.
3
Press the [Yes] key.
The COPY SETTING 1 menu appears
again.
Advertising
This manual is related to the following products: