2 precautions, 1 installation precautions, Installation site – Konica Minolta BIZHUB 210 User Manual

Page 41: Power source, Precautions, Installation precautions -3, Installation site -3 power source -3, 2precautions

Advertising
background image

Precautions

2

bizhub 162/210

2-3

2

Precautions

Observe the following precautions to maintain the machine in its best possi-
ble condition.

2.1

Installation precautions

Installation site

To ensure utmost safety and prevent possible malfunctions, install the ma-
chine in a location that meets the following requirements:
- A location away from curtains, etc. that may catch fire and burn easily

- A location that is not exposed to water or other liquids

- A location free from direct sunlight

- A location out of the direct airflow of an air conditioner or heater, and not

exposed to extremely high or low temperatures

- A well-ventilated location

- A location that is not exposed to high humidity

- A location that is not extremely dusty

- A location not subjected to undue vibrations

- A stable and level location

- A location where ammonia or other organic gases are not generated

- A location that does not put the operator in the direct airflow of exhaust

from the machine

- A location that is not near any kind of heating devices

Power source

The power source requirements are as follows.
- Voltage fluctuation:

AC220-240 V ±10%

- Frequency fluctuation:

Within ±3Hz

Use a power source with as few voltage or frequency fluctuations as possi-
ble.

Advertising
This manual is related to the following products: