Kathrein UFC 762si - Manual (Page 42)

42
SECURITY
Press the

button to open the main menu. Select the “Security” menu using the

buttons and press
the button. Enter the receiver PIN (factory setting “0000”) and confi rm it by pressing the button. The
following display appears (see example below):
Use the

buttons to select the lines to be changed and use the

buttons to perform the settings.
After you have made all the changes to the settings you can quit the menu again by pressing the

button
(your setting will be loaded).
Receiver Lock:
If the receiver lock is set to “On”, when the receiver is switched on it will request input of the PIN.
Menu Lock:
If the menu lock is set to “On”, when the main menu is called up it will request input of the PIN.
Change PIN:
Press the button – you will be requested to input the old PIN. Confi rm the input by pressing the button.
You must now input the new PIN and confi rm it by pressing the button. For security you must input the
new PIN a second time. Press the button to acknowledge the displayed message. The receiver PIN has
now been changed.