Klark Teknik DN9344E User Manual

Page 58

Advertising
background image

HELIX DN9340E/DN9344E Remote Control Software

User Guide


58 of 65

9.2.2

Multiple-unit Ethernet connections

To connect any Ethernet units in an Ethernet system

This fast Ethernet-only system can incorporate the Ethernet units in any combination. Connect the units

using Ethernet cable, using one of the options in Section 7.2. The first unit is connected to the

laptop/PC via an Ethernet cable. The Ethernet cable can be connected direct to the laptop/PC or to a
wireless access point for wireless operation.

To connect non-Ethernet units in an Ethernet-to-serial system

The HELIX DN9848 units are daisy-chained using serial RS-485 cabling. The first HELIX DN9848 unit is

connected to a Lantronix UDS1100 Ethernet-to-serial converter via either a serial RS-232 or RS-485
cable. Connection to the laptop/PC can be either direct from the Lantronix unit or via a wireless access

point for wireless operation; both these options require Ethernet cable.


To set up the Lantronix UDS1100 converter, see Section 9.3.

In this system the speed of operation is limited by the serial connection.

Advertising
This manual is related to the following products: