3 copy channels screen – Klark Teknik DN9344E User Manual

Page 24

Advertising
background image

HELIX DN9340E/DN9344E Remote Control Software

User Guide


24 of 65

6.3 Copy Channels Screen

To copy settings from one device to another

1

Click on the Copy Channels button to open the screen shown below (also see Note below).
On the left is a list of all the source channels that are available for copying from, while on
the right are all the channels that you can copy to. Only Mono channels are shown initially;

a mono channel can only be copied to another mono channel and similarly stereo can only

be copied to stereo.

2

If required, click on Show Stereo Channels to list the stereo channels. (The button toggles to

Show Mono Channels so that you can return to the previous list when required).

3

Click on the channel to be copied, so that it is highlighted.

4

Tick the † To check box of each channel to which the settings are to be copied.

Toggle this button to switch
between mono and stereo

channel lists

Settings may be
copied to one or
more ticked

channels

The channel to be

copied is

automatically

removed from the

Destination list

Advertising
This manual is related to the following products: