Klark Teknik DN9344E User Manual

Page 33

Advertising
background image

HELIX DN9340E/DN9344E Remote Control Software

User Guide


33 of 65

B

Wireless Card

2

Open your laptop/PC’s Control Panel and locate

and open the Wireless Network Connection Properties
dialogue box. If your wireless card is set up

to use Windows to configure its wireless

systems, a screen similar to that shown left

is presented that has a Wireless Networks
tab. Follow the steps given here to configure

the card.


If the Wireless Networks tab is not

available, please refer to the wireless card

manual for configuration instructions. Make

sure that you use the SSID and WEP key
from the Access Point Configuration.

3

Highlight Internet Protocol (TCP/IP) in the list and
choose Properties to open the Internet
Protocol Properties screen (left). If you are
using DHCP refer to your Access Point

manual for details. Otherwise, select Use the
following IP address
and type in an IP Address for
your wireless card using the same subnet

address as your Access Point and laptop.


Click OK to return to the previous screen.

4

Switch to the Wireless Networks tab (left).

Tick Use Windows to configure my wireless network
settings
. (The SSIDs of previously added
networks automatically appear in the
network lists.)

5

At the bottom panel, click Add… to open the
Wireless network properties window.

6

Type in the SSID address of the Access Point

and turn WEP on. Set Key Index to 1.

Clear The key is provided for me automatically tick
box to unlock the Network key fields. Type

in and confirm the WEP key as noted in the

Access Point configuration.

7

Click OK to confirm the settings and close the
Wireless Network Connections screen.

continued…

Advertising
This manual is related to the following products: