Klark Teknik DN9344E User Manual

Page 60

Advertising
background image

HELIX DN9340E/DN9344E Remote Control Software

User Guide


60 of 65

9.2.3

Multiple-unit serial connections

To connect a combination of non-Ethernet units serial-to-RS-485

Connect any combination of non-Ethernet units in a daisy chain configuration, using serial RS-485 cable.

Connect the first unit to the PC using any of the methods shown in Section 9.2.1.

To connect any combination of Ethernet units serial-to-Ethernet

Connect any combination of Ethernet units using Ethernet cable, using one of the options in Section 7.2.

Connect the first unit to the PC using the KT RS-232 host cable (supplied with every unit); connect it to

the front panel of the unit and then to the RS-232 port on the laptop/PC.


The speed of system operation is limited by the serial connection to the PC.

Advertising
This manual is related to the following products: