Replacing the printhead – Kodak ESP 3260 User Manual

Page 35

Advertising
background image

www.kodak.com/go/aiosupport

29

KODAK ESP 3200 Series All-in-One Printer

Replacing the printhead

IMPORTANT:

Replacing the printhead is not a regular maintenance procedure. Replace

the printhead only if you receive a new printhead from Kodak.

To replace the printhead:

1. Make sure your printer is on.

2. Lift the printer access door, and wait for the carriage to move to the access

position.

3. Remove any paper that may be loaded in the printer.

4. Remove both ink cartridges and set them aside.

Advertising
This manual is related to the following products: