2 configuring your printer, Configuring printer settings, Configuring basic printer settings – Kodak ESP 3260 User Manual

Page 10: Configuring your printer

Advertising
background image

4

www.kodak.com/go/aiosupport

2

Configuring Your Printer

This chapter presumes that you have set up your printer and that you may or may
not have installed the printer software.

Configuring printer settings

Configuring basic
printer settings

NOTE: When you first power on the printer, the printer automatically steps you

through the process of selecting the

Language.

To set or change basic printer settings:

1. Press

Home.

2. Press

to

select

Printer Settings, then press OK.

3. Press

to select one of the following settings:

Date and Time*

– Press

OK, then press

to select

Year, Month, Day, Hour, or Minute.

Press

or

to change the values; press

OK when you are done.

Time to Low Power

– Press

to change the time to energy-saving low power (select from 1 to 4

hours in 0.5 hour increments). After the Time to Low Power, the printer
goes into a low-power mode.

Tagged Images Printing (see

Printing tagged pictures, page 14

)

– Press

to

select

On or Off.

If you select

On, when you are printing pictures, the printer LCD prompts

you to verify that you want to print pictures that were tagged (or marked)
using your camera. Different cameras use different terminology; KODAK
Digital Cameras use “marked” images; others use either tagged images or
DPOF.

Language

– Press

OK, press

to select a language, then press

OK.

Reset All Settings (see

Resetting factory defaults, page 34

)

NOTE: Resetting factory defaults does not change the date and time, language, or

country/region.

4. Press

Back.

* You can also synchronize the printer's date and time to your computer from

Home

Center Settings under Tools in Home Center Software.

Advertising
This manual is related to the following products: