Konica Minolta NS-32L450A11 - Manual (Page 18)

14
NS-26L450A11/NS-32L450A11 26"/32" LCD, 1080p
www.insigniaproducts.com
Making connections
Connecting power
To connect the power:
• Connect the AC power cord to the AC connector
on the back of your TV, then plug the other end
into a power outlet.
Connecting an antenna or cable TV without a
cable box
To connect an antenna or cable TV without a
cable box:
• Connect a coaxial cable (not provided) to the
ANT/CABLE IN jack on the back of your TV and to
the antenna or cable TV wall jack.
Connecting a cable or satellite box
Many cable or satellite TV boxes have more than
one connection type. To get the best video, you
should use the best connection type available.
Cautions
• Check the jacks for position and type before
making any connections.
• Loose connections can result in image or color
problems. Make sure that all connections are
tight and secure.
• The external audio/video equipment shown
may be different from your equipment. If you
have questions, refer to the documentation that
came with your equipment.
• Always unplug the power cord when
connecting external equipment.
Notes
• Your TV should only be operated from the
power source indicated on the label.
• Always unplug the AC power cord from the
power outlet when you will not be using your
TV for an extended period of time.
Notes
• Use a 75 ohm cable to eliminate interference
and noise from radio waves.
• Do not bundle the 75 ohm cable with the power
cord or other cables.
• If the antenna is not installed correctly, contact
qualified service personnel to correct the
problem.
Connection type Video quality
HDMI Best
Component Better than S-Video, composite, or coaxial
S-Video Better than composite or coaxial
Composite Better than coaxial
Coaxial Good
Back of TV
Antenna or cable TV
wall jack.