Konica Minolta DI3510 - Manual (Page 145)

Utility Mode Operations
7
Di2510/Di3010/Di3510 7-29
To set the “Crease/Center Staple” function (Only when the finisher
or saddle kit are installed)
When the optional saddle kit (including the finisher) is installed, this
controls the offset for creases created using the booklet creation mode,
and for any specified center staples.
1
Press the [Utility] key.
2
Touch [User’s Choice].
3
Touch [5/6], and then touch
[Crease/Center Staple].
4
Touch the arrow keys to adjust the
setting, and then touch [Enter].
5
Touch [END] to return to the Utility
screen, and then touch [Exit] to
return to the Basics screen.