Konica Minolta DI3510 - Manual (Page 153)

Utility Mode Operations
7
Di2510/Di3010/Di3510 7-37
7.7 User Management Functions
The following settings can be specified or operations can be performed
from the User Management screen.
● Confirmation beep volume
● Alarm beep volume
● Touch panel cleaning
● Dehumidifying
● Toner replenishing
To adjust beep volumes
(“Confirmation Beep” and “Alarm Volume” functions)
You can adjust the volume of the electronic beep used when pressing a
key on the copier, or beeps issued to indicate alarms.
The following procedure describes how to adjust the volumes of two types
of beeps. Additionally, beep volumes can be easily adjusted per user.
✔ [Confirmation Beep]: This function is used to adjust the volume of the
beep that is sounded when a touch panel button is touched. (Default
setting: 3)
✔ [Alarm Volume]: This function is used to adjust the volume of the alarm
that is sounded when a paper misfeed occurs or an incorrect operation
is specified. (Default setting: 3)
1
Press the [Utility] key.
2
Touch [User Management], and
then touch the button for the beep
that you wish to adjust.
3
Touch the arrow keys to select the
desired volume, and then touch
[Enter].
4
Touch [END] to return to the Utility
screen, and then touch [Exit] to
return to the Basics screen.