Konica Minolta DI3510 - Manual (Page 155)

Utility Mode Operations
7
Di2510/Di3010/Di3510 7-39
To dehumidify the duplexing document feeder (“Dehumidify”
function)
When there are rapid changes in the temperature of a room, or high
humidity, condensation may occur on the surface of the photosensitive
receptor drum or the scanner on the copier, resulting in blurred images.
When this occurs, use the “Dehumidify” function (Approximately
5 minutes) to remove the condensation.
If you wish to remove condensation at a set time every day. For details,
refer to
“To set the “Scanner Dry” function” on page 7-28.
✎
Note
Condensation: a phenomenon where atmospheric water collects on
the photosensitive receptor drum or the scanner, forming water
droplets.
Photosensitive receptor drum: the part that contacts the film copy.
✎
Note
When you wish to remove condensation from the photosensitive
receptor drum, contact your local technical representative.
You can still copy if there during dehumidifying. (however,
dehumidifying will be interrupted.)
To specify a time to perform the dehumidifying operation, refer to
page 7-28.
1
Press the [Utility] key.
2
Touch [User Management], and then touch [Dehumidify].
The dehumidifying operation begins.