Konica Minolta DI3510 - Manual (Page 176)

8
Administrator Management Operations
8-20 Di2510/Di3010/Di3510
8.6 Setting Machine Access
Get Penalty
The “Get Penalty” function is used to specify whether (“On”) or not (“Off”)
access to Administrator mode, mailbox print jobs and user boxes is
monitored.
If the “Get Penalty” function is set to “On”, the number of incorrect
attempts to access Administrator mode, mailbox print jobs and user boxes
is counted. After three incorrect attempts, access to the machine is
denied. To allow Administrator mode to be accessed again, turn the
machine off, then on again. However, to allow mailbox print jobs and user
boxes to be accessed again, the penalty must be removed. For more
details, refer to the Printer Controller User Manual.
To make settings for the “Get Penalty” function
1
Follow the procedure described in
“To display the Administrator
Management screens” on page 8-1 to display the Administrator
Management screen.
2
Touch [Admin. 2], and then touch
[Get Penalty].
3
To use the “Get Penalty” function,
touch [ON]. To stop using the “Get
Penalty” function, touch [OFF].
4
Touch [Enter].
❍ To return to the previous screen,
touch [Cancel].
5
Continue touching [Enter] to return
to the Utility screen, and then touch [Exit] to return to the Basics
screen.