Kenwood DPF-J5010 - Manual (Page 10)

: Keys and controls used in the operations described on this page.
10
CD-224M/DPF-J5010 (En)
Preparation
STANDBY
POWER
I D C S 0 0 1 E : 1 3 2 •
Preparation
Up to 200 CDs can be loaded in the carousel. Disc exchange
also is possible during playback.
Loading discs in the carousel
1
Switch power ON.
Press the POWER ( ) key.
2
Open the door panel toward the front.
Press PUSH OPEN at the right top
of the door panel.
3
Load discs.
÷ Do not place any object on the open door panel.
1Turn the DISC SKIP knob and bring
the slot with the disc to be placed to
the front.
Carousel
2Insert the disc vertically.
Disc slot
Insert CDs with the label side
facing toward your right.
Insert one CD per slot all the way.
The slot No. is displayed when the DISC SKIP knob is turned.
Insert discs with the label on the right side. Playback is not
possible when a disc is inserted the other way round.
÷ Do not insert more than one disc in a slot.
When a disc not corresponding to CD-TEXT is inserted,
searching for this disc will be facilitated when the title name
is registered at the time of disc insertion.
“Registration of Title Name”
)
Never let your hand or any object enter inside the unit.
3Repeat 1 and 2 to insert discs.
Note Note